The lifter has become an ideal and excellent way to solve the problem of rapid pedestrian diversion

The elevator column has become an ideal and excellent way to solve the problem of rapid diversion of pedestrians, especially in places where people are concentrated, such as airports, railway stations, sports venues, schools, etc., the elevator column will not cause obstacles to the passage of people, very convenient, smooth, safe and reliable.

Hydraulic automatic lifting column is the most mature lifting column product technology is also a product that has been widely used. Not only reflected in the use of a wide range of scenarios, use conditions are more relaxed, and higher technical support, compared with other types of lifting column after sales products are significantly less. 1. Safe and reliable. In case of power failure and other emergencies, the emergency drop button can be opened by hand and the column can be lowered to open the passage and release the vehicle. The upper and lower parts of the internal fixed mechanism are respectively equipped with current detection sensors and electromagnetic sensors, so as to realize the effective limit of the overcurrent protection of the power unit and the movement of the cylinder, and the operation is stable and reliable. 2. Economical and practical because it is an electric integrated mode, it is environmentally friendly and energy-saving, with low consumption, lower failure rate, longer service life and reduced maintenance cost. In addition, the use of non-traditional guide mechanism design, installation and maintenance, more convenient and quick.

How to buy hydraulic full automatic lifting column

1. Channel width: The width of the channel to be managed determines the number of equipment to be used. Generally, the distance between the center of the column should not exceed 1.3 meters (1.1~ 1.5m), and different places of use can control the width according to their actual needs.

2. Traffic flow: This number is one of the most important parameters for product selection, but users often ignore this parameter. First understand the installation site of the annual/monthly total vehicle flow, the average daily vehicle flow.

3. Usage frequency: It is necessary to understand the short time traffic flow in the peak period of the vehicle road in the place of use, so as to select automatic lifting column, semi-automatic lifting column, manual lifting column and fixed lifting column.

4. Lifting speed: This parameter is usually concerned. The lifting speed can be adjusted according to the movement, with the rise of 3 seconds and the fall of 2 seconds.

5. Safety level of the place of use: Although all the lifting columns can block vehicles, the blocking effect of civil products and professional anti-terrorist products is really quite different.

6. Group management: The configuration and selection of the entire control system are determined by whether it is necessary to separate the lane entry and exit or to group management according to the lane.